BC
BurnerCRM
•7 min read•Aaron Allen

How to Manage Stove Installation Jobs from Enquiry to Completion

Most installers track jobs in a notebook, a spreadsheet or a string of WhatsApp messages. That works until it doesn't. Here's how to build a workflow that keeps every job moving from first enquiry through final payment, and turns completed installs into repeat service work.

Most stove installers don't set out to build a process. They start with a notebook, a spreadsheet or a string of WhatsApp messages between the office and the van. That works fine when you're fitting two stoves a week. It breaks down the moment a survey gets missed, a quote sits in a customer's inbox for three weeks, or you realise you never took the data-plate photo on a job from last month.

The installers who grow past that point all do the same thing: they build a repeatable workflow that covers every stage from enquiry to paid invoice, and they stick to it. This is what that workflow looks like in practice.

The eight stages every job passes through

A stove installation isn't a single task. It's a sequence of dependent steps, and each one needs a clear owner and a visible status. The stages that matter:

  1. Enquiry: lead comes in, you log the address, the appliance type if they know it, and the source (referral, website, repeat customer).

  2. Surveying: site visit booked, measurements taken, flue route assessed, photos of the fireplace opening and chimney captured.

  3. Quoting: estimate built from the survey notes, sent as a professional PDF, follow-up date set.

  4. Confirmed: customer accepts, deposit taken, installation week pencilled in.

  5. In Progress: installation underway, daily photos captured, issues flagged immediately.

  6. Complete: appliance commissioned, HETAS certificate applied for, flue test recorded, data-plate and CO detector photos taken, handover done.

  7. Invoiced: final invoice raised, payment terms clear.

  8. Paid: payment received, job archived, service reminder scheduled.

If you can't look at a board or a list right now and tell me exactly which stage each live job is in, you don't have a workflow. You have a memory test.

Capture the right information at the right stage

The mistake most installers make is trying to capture everything at once. You don't need the HETAS reference at the enquiry stage. You don't need the flue liner batch number at the quoting stage. Capture what's relevant when it's relevant:

At enquiry: customer name, address, phone, email, how they found you, appliance preference if known.

At survey: flue route photos, fireplace opening dimensions, chimney condition notes, access constraints, parking, any building regs flags (listed building, conservation area, smoke control).

At quoting: appliance model, liner specification, labour breakdown, any optional extras (carbon monoxide alarm, hearth pad, external air kit), total price, validity period.

At confirmation: deposit amount and date, agreed installation week, any customer-supplied materials.

During installation: daily progress photos, any variations agreed in writing, flue test results, commissioning readings.

At completion: HETAS reference number, flue liner warranty registration details, data-plate photo, CO detector photo, customer sign-off, handover checklist.

After payment: service due date (12 months from commissioning), warranty expiry dates, referral request sent.

The pattern is simple: each stage has a defined output. When that output exists, the job moves to the next stage. No output, no move.

Quoting: stop sending prices in text messages

A quote sent as a WhatsApp message or a scribbled note on the back of an invoice book doesn't look professional, and it doesn't protect you. A proper estimate includes:

  • Your business details and the customer's details

  • A line-item breakdown: appliance, flue system, labour, accessories, disposal, any subcontractor costs

  • What's excluded (making good plaster, electrical work, scaffolding beyond a basic tower)

  • Payment terms: deposit percentage, balance due on completion

  • Validity period (30 days is standard)

  • Your terms and conditions reference

BurnerCRM generates this as a PDF from the survey data you've already entered. You review it, hit send, and the system logs when the customer opened it. That timestamp alone has saved installers from "I never saw the quote" disputes.

Compliance paperwork: do it once, do it at the right time

HETAS registration, flue liner warranty, Building Control notification: none of these are optional, and all of them are easier when you attach them to the job record at the point they happen.

The flue test record gets filled in on site, photographed, and uploaded before you leave the property. The HETAS certificate application goes in the same week as commissioning. The warranty registration for the liner happens while the batch number is still on the box. Building Control notification (where required) goes in before the install starts.

When the next customer asks "can you send me the HETAS certificate for the job you did three years ago?", you open the job, click the document, and email it. That takes thirty seconds. The alternative is digging through a filing cabinet or emailing a manufacturer and waiting a week.

Completion photos: the ones you'll wish you had

Three photos are non-negotiable on every install:

  1. The data plate: model and serial number visible. This is what the manufacturer asks for on a warranty claim.

  2. The CO detector: fitted, tested, location clear. This is what Building Control and your insurer ask for.

  3. The finished installation: appliance in situ, hearth, flue termination visible. This is what you show the next prospect who says "what does a typical install look like?"

BurnerCRM stores these against the job in a carousel. You can pull them up on your phone while standing in a showroom with a prospective customer. That beats "I've got some photos somewhere on my old phone" every time.

The follow-up that pays for itself

Most installers finish a job, take the final payment, and move to the next one. The ones who build a steady stream of repeat and referral work do one extra thing: they schedule the annual service reminder at the point of handover.

The conversation goes like this: "The stove will need a service in twelve months. I'll put a reminder in my system and get in touch when it's due. Most people forget, and that's when you get call-outs for blocked flues or failed seals."

BurnerCRM does this automatically. Every completed job creates a service reminder for twelve months out. When that date approaches, the system flags it. You call the customer, book the service, and you've just turned a one-off install into recurring revenue. Multiply that by fifty installs and you have a service run that fills your quiet weeks.

The same principle applies to referrals. Ask at handover: "If you know anyone else looking for a stove, send them my way." Note the referral source on every new enquiry. Over time you'll see which customers and which channels bring the work that converts.

What this looks like in a team

If it's just you, a notebook and a calendar can just about work until you're ill, or on holiday, or the notebook gets left in the van. The moment you add a second person, you need a shared view.

A shared pipeline means:

  • The surveyor sees the enquiry, books the visit, uploads photos and notes.

  • The estimator builds the quote from those notes without asking "what size was the opening again?"

  • The installer sees the confirmed job, knows the week, has the spec and the photos.

  • The office sees the completion, raises the invoice, chases payment.

  • Everyone sees the same status in real time. No "have you quoted Mrs Jones yet?" messages at 9pm.

That's what the job pipeline in BurnerCRM is built for. Eight columns. Drag and drop. Everyone sees the same board.

Start with the next job

You don't need to overhaul everything this week. Pick the next enquiry that comes in. Open a new job record. Fill in the enquiry fields. Book the survey. Move the card to Surveying when the visit is done. Build the quote from the survey notes. Move it to Quoting. Send it. Move it to Confirmed when the deposit lands.

Do that for five jobs in a row. You'll have a board that shows you exactly where your work is, what needs chasing, and what's coming up. That's the start of a workflow. The rest is just sticking to it.


BurnerCRM is built around this exact workflow: eight stages, document storage, completion photos, automatic service reminders, and a shared pipeline your whole team can see. Start a 14-day free trial and run your next five jobs through it.

Stay in touch

Want help choosing the right CRM for your installation business?

If this article hit on a problem you are trying to solve, send us a quick note. We’ll reply personally and help you decide whether BurnerCRM fits your workflow.